Oil Absorbent mats

ECONAD Oil Absorbent Mats can be used for:

• Emergency oil spill response
• Industrial facilities
• Workshops and maintenance areas
• Warehouses
• Ports and terminals
• Shipyards and marine facilities
• Fuel storage and transfer areas
• Machinery and equipment
• Production facilities
• Transport and logistics operations
• Protection of floors and working surfaces

They can be used both for emergency cleanup and as a preventive measure beneath equipment where leaks may occur.

The mats are manufactured from polypropylene or polypropylene combined with synthetic absorbent material.

Depending on the selected size and thickness, their absorption capacity ranges from approximately 288 to 1,000 litres per 100 mats.

This makes them suitable for applications requiring significantly greater absorption capacity than conventional thin absorbent sheets.

The increased thickness of the mats allows them to retain a larger quantity of liquid in a relatively small surface area.

They are particularly useful for:

• Placing beneath leaking pumps and machinery
• Absorbing concentrated local spills
• Protecting maintenance areas
• Collecting liquid beneath pipelines and valves
• Emergency response around tanks and equipment
• Temporary protection during repair operations

ECONAD Oil Absorbent Mats are designed to absorb:

• Oil
• Petroleum products
• Coolants
• Solvents
• Other compatible industrial liquids

The mats are supplied in white, allowing absorbed contamination to remain clearly visible during use.

The range includes compact mats for everyday industrial use as well as larger and thicker configurations for higher-volume spills.

Smaller models are suitable for:

• Workshops
• Equipment maintenance
• Pumps and valves
• Local leaks

Larger models can be used where greater absorption capacity or wider surface coverage is required.

Oil absorbent mats require no specialised equipment and can be placed directly beneath or over the contaminated area.

Their compact format makes them easy to:

• Transport
• Store near potential spill locations
• Deploy rapidly
• Replace after saturation
• Include in emergency spill-response stations

The standard product specification indicates up to 50% reuse, depending on the absorbed liquid, handling method and condition of the mat after use.

Where reuse is appropriate, the recovered material should be handled in accordance with the properties of the absorbed liquid and applicable environmental requirements.

ECONAD Oil Absorbent Mats can be used together with:

• Oil absorbent sheets
• Oil absorbent rolls
• Absorbent booms
• Absorbent mini-booms
• ECONAD biosorbent
• Spill containment berms
• Oil spill kits
• Waste collection equipment

This allows different absorbent products to be combined according to the size and nature of the spill.

• High Local Absorption Capacity: Thick absorbent construction allows significant quantities of liquid to be collected within a compact area.
• Multiple Sizes and Thicknesses: Different configurations are available for small leaks, concentrated spills and higher-volume industrial applications.
• Suitable for Industrial Liquids: Designed for oil, petroleum products, coolants, solvents and other compatible liquids.
• Easy to Deploy: The mats can be positioned immediately without specialised tools or equipment.
• Compact Storage: They can be stored close to machinery, tanks and other potential spill sources for rapid access.
• Reusable Potential: Depending on operating conditions, the mats may provide partial reuse capability.
• Custom Configurations Available: Larger and thicker models can be supplied for applications requiring increased absorption capacity.